HP PSC 1608 All-in-one Printer – Driver Download, Setup and User Guide

Advertisement

Setting Up the HP PSC 1608 All-in-One Printer: A Comprehensive Guide

Step 1: Unpack and Prepare

  • Carefully unpack the printer and remove all packaging materials.
  • Place the printer on a stable and level surface.
  • Ensure that the printer is within reach of an electrical outlet and a telephone jack (for faxing).

Step 2: Install the Cartridges

  • Open the printer’s front door.
  • Remove the protective packaging from the black and color cartridges.
  • Insert the black cartridge into the left slot and the color cartridge into the right slot.
  • Gently press down on both cartridges until they snap into place.

Step 3: Connect the Printer

  • Connect the power cord to the printer and an electrical outlet.
  • Connect the telephone cord to the printer and a telephone jack (if desired).
  • Turn on the printer by pressing the power button.

Step 4: Install the Software

  • Insert the HP software CD into your computer’s CD drive.
  • Follow the on-screen instructions to install the software.
  • Select “HP PSC 1608 All-in-One Printer” as the printer model.

Step 5: Configure Network Settings (Optional)

  • If you want to connect the printer to a network, follow these steps:
    • Press the “Wi-Fi” button on the printer’s control panel.
    • Select your Wi-Fi network from the list.
    • Enter your network password.
    • Press “OK” to save the settings.

Troubleshooting Common Issues

Printer Won’t Print

  • Check that the printer is connected to power and turned on.
  • Ensure that the cartridges are properly installed and have ink.
  • Open the HP software and select “Troubleshoot” to check for and resolve any errors.
  • Restart the printer by unplugging it and plugging it back in.

Fax Not Working

  • Check that the printer is connected to a telephone jack.
  • Make sure that the dialing tone is working.
  • Verify that you have entered the correct recipient’s fax number.
  • Resend the fax after restarting the printer.

Scanner Not Working

  • Open the HP software and select “Scan.”
  • Check that the document is properly placed on the scanner glass.
  • Adjust the scan settings as needed.
  • Retry the scan after restarting the printer.

Error Messages

  • “Out of Paper”: Load paper into the printer.
  • “Ink Cartridge Low”: Replace the indicated cartridge.
  • “Paper Jam”: Remove any jammed paper from the printer.
  • “Communication Error”: Check the network connection or telephone line.
  • “Printer Failure”: Contact HP support for assistance.

Additional Tips

  • Use genuine HP cartridges for optimal performance.
  • Clean the printheads regularly to maintain print quality.
  • Consider using the HP Smart app to print and scan wirelessly from your smartphone or tablet.

Download HP PSC 1608 All-in-one Printer Driver

Ensure your device is fully compatible with the latest drivers for the HP PSC 1608 All-in-one Printer. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver