HP Smart Tank Plus 550 – Driver Download, Setup and User Guide

Advertisement

A Comprehensive Guide to Setting Up the HP Smart Tank Plus 550

Step 1: Unboxing and Preparing the Printer

  • Carefully remove all packaging materials and accessories.
  • Place the printer on a flat, stable surface.
  • Connect the included power cord to the printer and a power outlet.

Step 2: Installing the Ink Tanks

  • Lift the printer’s top cover and remove the orange protective tape from the ink tank nozzles.
  • Open the ink tank door on the left side of the printer.
  • Insert the ink bottles into their corresponding slots until they click into place.
  • Close the ink tank door.

Step 3: Installing the Printheads

  • Open the printhead door on the right side of the printer.
  • Remove the protective caps from the printheads.
  • Align the printheads with their slots and insert them firmly.
  • Close the printhead door.

Step 4: Connecting to a Wi-Fi Network (Optional)

Option 1: Using the HP Smart App

  • Download the HP Smart app on your mobile device.
  • Follow the in-app instructions to connect the printer to your Wi-Fi network.

Option 2: Using the Control Panel

  • Press the Wireless button on the printer’s control panel.
  • Use the arrow keys to select “Configure Wireless.”
  • Press the OK button and follow the on-screen prompts to enter your Wi-Fi password.

Step 5: Loading Paper

  • Open the input tray and pull it out.
  • Adjust the paper guides to match the size of the paper you are using.
  • Load paper into the input tray and push it in gently.
  • Adjust the output tray by pulling it out.

Step 6: Printing a Test Page

  • On the printer’s control panel, press the Information button.
  • Select “Reports” and then “Print Report.”
  • If the test page prints successfully, your printer is properly set up.

Troubleshooting Common Issues

Issue: Printer is Not Printing

  • Ensure that the printer is turned on and connected to a power outlet.
  • Check if the ink tanks are full and properly installed.
  • Inspect the printheads for smudges or blockages. Clean them if necessary.
  • Make sure that the paper size and type match the settings in the print driver.

Issue: Printer is Printing Blank Pages

  • Check if there is any paper loaded in the input tray.
  • Verify that the print cartridge is correctly installed.
  • Make sure that the print settings are correct for the paper type you are using.

Issue: Printer is Not Connecting to Wi-Fi

  • Ensure that your router is functioning properly and within range.
  • Check if the printer was successfully connected to the Wi-Fi network.
  • Try resetting the printer’s network settings by pressing the Wireless button for 5 seconds.

Issue: Printer is Noisy

  • The printer may require cleaning or lubrication.
  • Ensure that the printheads are properly installed and not rubbing against anything.
  • Contact HP support for further assistance if the noise persists.

Additional Tips

  • Use high-quality HP ink for optimal print results.
  • Perform regular cleaning and maintenance to keep the printer in good condition.
  • Download the latest printer drivers and firmware updates from the HP website.
  • If you encounter any difficulties during setup, refer to the user manual or contact HP support for assistance.

Download HP Smart Tank Plus 550 Driver

Ensure your device is fully compatible with the latest drivers for the HP Smart Tank Plus 550. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver