HP Tango – Driver Download, Setup and User Guide

Advertisement

A Comprehensive Guide to Setting Up Your HP Tango

Step-by-Step Instructions:

  1. Unpack and Power On: Remove the printer from its packaging and connect it to a power source.
  2. Download HP Smart App: Go to the App Store (iOS) or Google Play (Android) and download the HP Smart app. Create an account if you don’t have one.
  3. Set Up Bluetooth or Wi-Fi Connection: Open the HP Smart app and follow the on-screen instructions to connect the printer to your Bluetooth or Wi-Fi network.
  4. Load Paper: Pull up the input tray and load plain paper of the recommended size and type.
  5. Install Ink Cartridges: Open the ink cartridge access door and remove the protective tape from the cartridges. Insert the cartridges in the correct slots until they click into place.
  6. Initialize the Printer: The printer will automatically initialize, which may take a few minutes.
  7. Run Print Quality Report: Once initialized, go to the HP Smart app, tap the printer icon, and select “Print Quality Report” to ensure your printer is working correctly.

Troubleshooting Common Issues:

Printer Not Connecting to Bluetooth or Wi-Fi:

  • Check if the printer is within range of the Bluetooth or Wi-Fi signal.
  • Ensure that your device has Bluetooth or Wi-Fi enabled.
  • Restart the printer and the HP Smart app.
  • Reset the printer’s network settings by holding the “Wireless” and “Cancel” buttons simultaneously for 5 seconds.

Printer Not Printing:

  • Check if there is paper loaded in the input tray.
  • Make sure the ink cartridges are properly installed and have sufficient ink.
  • Clean the printheads by going to the HP Smart app, tapping the printer icon, and selecting “Clean Printheads.”
  • Restart the printer.

Paper Jam:

  • Open the printhead access door and gently remove the jammed paper.
  • Close the access door and resume printing.
  • If the paper jam persists, contact HP support.

Ink Cartridge Issues:

  • Ensure that the ink cartridges are compatible with your Tango printer.
  • Check if the cartridges are properly inserted and locked into place.
  • Remove and reinsert the cartridges to ensure proper contact.
  • Replace low or empty cartridges with new ones.

Additional Tips:

  • Use the HP Smart app to access features like remote printing, scan to cloud, and order ink.
  • Enable Instant Ink subscription for automatic ink delivery and cost savings.
  • Keep your printer software and firmware up to date by checking for updates in the HP Smart app.
  • Contact HP support if you encounter any persistent issues that cannot be resolved using these troubleshooting steps.

Download HP Tango Driver

Ensure your device is fully compatible with the latest drivers for the HP Tango. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver