Xerox Phaser 3155 – Driver Download, Setup and User Guide

Advertisement

Setting Up the Xerox Phaser 3155 Printer

Unboxing and Assembly

  1. Remove the printer from the box and unpack all contents.
  2. Remove all protective materials and packaging.
  3. Lift the top cover and remove the orange toner cartridge.
  4. Unpack the toner cartridge and gently shake it side-to-side to distribute the toner.
  5. Insert the toner cartridge into its slot.
  6. Close the top cover and press down to lock it.
  7. Connect the power cable to the printer and the power outlet.
  8. Turn on the printer using the power button.

Network Configuration

  1. On the printer’s control panel, go to Settings > Network Setup.
  2. Select Wired Network or Wireless Network.
  3. For wired networks: Connect the Ethernet cable to the printer and the network router. The printer will automatically obtain IP settings.
  4. For wireless networks:
    • Select Wireless Setup Wizard.
    • Follow the on-screen instructions to connect to your wireless network.
    • Enter your network password if prompted.
    • Once connected, print a network configuration page to verify the IP address.

Driver Installation

  1. Visit the Xerox website and download the latest driver for your operating system.
  2. Open the downloaded file and follow the on-screen instructions to install the driver.
  3. Once installed, click Add Printer in your operating system’s settings.
  4. Select the Xerox Phaser 3155 printer and add it.

Troubleshooting Common Issues

Printer Not Printing

  • Check the power connection and make sure the printer is turned on.
  • Verify that the toner cartridge is installed correctly.
  • Ensure that the printer is connected to the network and has a valid IP address.
  • Check the printer queue for any errors or paused jobs.
  • Restart the printer and try printing again.

Print Quality Issues

  • Inspect the toner cartridge for any damage or debris.
  • Check the paper quality and make sure it is compatible with the printer.
  • Adjust the print settings, such as resolution and paper type.
  • Clean the printhead using the printer’s utility software.

Network Connection Problems

  • Verify that the network cable is securely connected.
  • Check the network router for any issues.
  • Restart the printer and the network router.
  • Reset the printer’s network settings to factory defaults.

Other Issues

  • If the printer displays error messages, check the printer’s user manual for specific troubleshooting instructions.
  • Contact Xerox customer support for further assistance.

Download Xerox Phaser 3155 Driver

Ensure your device is fully compatible with the latest drivers for the Xerox Phaser 3155. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver