Xerox Phaser 6130N – Driver Download, Setup and User Guide

Advertisement

Setting Up the Xerox Phaser 6130N

Step 1: Unpack and Inspect

  • Carefully unpack the printer and remove all packaging materials.
  • Inspect the printer for any visible damage. If damage is found, contact Xerox support immediately.

Step 2: Install Toner Cartridge

  • Open the front cover of the printer.
  • Remove the protective wrapping from the toner cartridge.
  • Insert the toner cartridge into the printer and close the cover.

Step 3: Connect Cables

  • Connect the power cord to the printer and an electrical outlet.
  • Connect the USB cable to the printer and your computer (for direct USB connection).
  • Alternatively, connect the Ethernet cable to the printer and your network (for Ethernet connection).

Step 4: Install Printer Drivers

Windows:

  • Insert the Xerox Phaser 6130N software CD into your computer.
  • Run the setup wizard and follow the prompts.
  • Select the printer model and choose the desired connection type (USB or Ethernet).

Mac:

  • Download the latest Xerox Phaser 6130N driver from the Xerox website.
  • Open the downloaded file and follow the installation instructions.
  • Add the printer to your computer’s System Preferences.

Step 5: Set Default Printer

  • Go to your computer’s printer settings.
  • Set the Xerox Phaser 6130N as the default printer.

Step 6: Network Configuration (Ethernet Only)

  • Open your computer’s network settings.
  • Find the Xerox Phaser 6130N printer in the network list and select it.
  • Configure the network settings according to your network’s requirements (e.g., IP address, subnet mask, gateway).

Troubleshooting Common Issues

Printer Not Found

  • Ensure the printer is powered on and connected to your computer or network.
  • Check the USB or Ethernet cable connections.
  • Reinstall the printer drivers.

Paper Jams

  • Open the printer cover and remove any jammed paper gently.
  • Check the paper tray for any obstructions or incorrectly loaded paper.
  • Adjust the paper guides in the paper tray.

Print Quality Issues

  • Check the toner level and replace if necessary.
  • Clean the printer cartridges and imaging unit.
  • Inspect the paper quality and use recommended paper types.

Network Connectivity Problems

  • Verify the Ethernet cable is securely connected.
  • Check your network settings and ensure the printer has a valid IP address.
  • Reset the printer’s network configuration to factory defaults.

Slow Printing Speed

  • Check if the printer is set to the correct print mode (e.g., normal, high-quality).
  • Reduce the print resolution for faster print speeds.
  • Ensure the printer has sufficient memory (RAM) for the printing task.

Additional Tips

  • Use genuine Xerox toner cartridges for optimal print quality.
  • Perform regular maintenance tasks (e.g., cleaning, troubleshooting) to prolong the printer’s life.
  • Consult the Xerox Phaser 6130N user manual for detailed information and troubleshooting assistance.

Download Xerox Phaser 6130N Driver

Ensure your device is fully compatible with the latest drivers for the Xerox Phaser 6130N. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver