Xerox Phaser 6250DX – Driver Download, Setup and User Guide

Advertisement

Detailed Guide to Setting Up the Xerox Phaser 6250DX

Unboxing and Assembly

  1. Carefully unpack the printer from its box.
  2. Remove all packaging materials and protective covers.
  3. Place the printer on a flat, stable surface.
  4. Connect the power cord to the back of the printer and then plug it into a power outlet.

Installing Drivers and Software

  1. Insert the software CD or download the software from the Xerox website.
  2. Run the setup wizard and follow the on-screen instructions.
  3. The wizard will guide you through installing the necessary drivers and software.
  4. Once the installation is complete, restart your computer.

Network Configuration

Wired Connection:

  1. Connect an Ethernet cable from your router or switch to the Ethernet port on the back of the printer.
  2. The printer will automatically obtain an IP address from your DHCP server.

Wireless Connection:

  1. Press the “Wi-Fi Protected Setup (WPS)” button on the printer.
  2. Within 2 minutes, press the WPS button on your wireless router.
  3. The printer will automatically connect to your wireless network.

Paper Loading

  1. Open the front cover of the printer.
  2. Pull out the paper tray.
  3. Fan the paper to separate any sheets that may be stuck together.
  4. Load the paper into the tray, ensuring the edges are aligned with the guides.
  5. Adjust the paper guides to fit snugly against the paper.
  6. Close the paper tray and the front cover.

Toner Installation

  1. Open the top cover of the printer.
  2. Pull out the toner cartridge.
  3. Remove the protective cap from the new toner cartridge.
  4. Insert the new toner cartridge into the printer.
  5. Close the top cover.

Troubleshooting Common Issues

Printer Not Responding

  • Check that the printer is powered on and connected to a power source.
  • Verify that all cables are securely connected.
  • Restart the printer by turning it off and on again.

Print Quality Issues

  • Ensure that the toner cartridge is correctly installed.
  • Adjust the paper type in the printer settings to match the paper you are using.
  • Clean the print heads by following the instructions in the printer’s user manual.

Wireless Connection Problems

  • Make sure that the printer is within range of your wireless network.
  • Check that your wireless network is broadcasting and discoverable.
  • Try resetting the printer’s network settings by pressing and holding the “Wi-Fi” button for 10 seconds.

Paper Jams

  • Open the front cover and remove the paper tray.
  • Carefully remove any jammed paper from the printer.
  • Reload the paper tray, ensuring that the guides are adjusted correctly.

Additional Tips

  • Regular maintenance, such as cleaning the print heads and rollers, can help prevent problems.
  • Use high-quality paper to avoid paper jams and improve print quality.
  • Keep the printer updated with the latest firmware from the Xerox website.
  • Contact Xerox support if you encounter any issues that you cannot resolve yourself.

Download Xerox Phaser 6250DX Driver

Ensure your device is fully compatible with the latest drivers for the Xerox Phaser 6250DX. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver