Xerox Phaser 6350DT – Driver Download, Setup and User Guide

Advertisement

Setting Up the Xerox Phaser 6350DT

Materials Required

  • Xerox Phaser 6350DT printer
  • Toner cartridge
  • Drum unit
  • Ethernet or USB cable
  • Screwdriver (for network configuration)

Step-by-Step Instructions

1. Unpack the Printer

  • Carefully remove the printer from its packaging.
  • Dispose of the packaging responsibly.

2. Install the Toner Cartridge and Drum Unit

  • Open the front cover of the printer.
  • Grasp the green handles on the toner cartridge and pull it out of the printer.
  • Open the new toner cartridge package and remove the cartridge.
  • Shake the toner cartridge gently from side to side.
  • Insert the new toner cartridge into the printer, aligning the arrow on the cartridge with the mark on the printer.
  • Slide the cartridge into place until it clicks.
  • Repeat this process for the drum unit.

3. Connect the Printer to Power

  • Plug the power cord into the printer and into a power outlet.
  • Turn on the printer using the power switch.

4. Select the Language and Location

  • The printer’s display will prompt you to select a language and location.
  • Use the arrow keys to navigate and select the desired options.
  • Press the “OK” button to confirm your selections.

5. Load Paper

  • Open the paper tray at the bottom of the printer.
  • Fan the paper to separate any stuck sheets.
  • Align the paper with the guides on the paper tray.
  • Slide the paper into the tray until it stops.

6. Connect the Printer to the Network or Computer (Optional)

  • Ethernet: Use an Ethernet cable to connect the printer to a network router.
  • USB: Connect the printer to a computer using a USB cable.

7. Install Printer Drivers (If Required)

  • If connecting the printer via USB, no driver installation is necessary.
  • If connecting via Ethernet, download and install the appropriate printer drivers from the Xerox website.

8. Configure Network Settings (If Necessary)

  • Ethernet:
    • Press the “Menu” button on the printer panel.
    • Use the arrow keys to navigate to “Networking.”
    • Select “IPv4 Configuration” and press “OK.”
    • Enter the IP address, subnet mask, and gateway address.
    • Press “OK” to save the settings.
  • Wi-Fi:
    • Refer to the printer’s user manual for specific instructions on Wi-Fi configuration.

Troubleshooting Common Issues

  • Printer not turning on:

    • Ensure that the power cord is securely connected.
    • Try a different power outlet.

  • No paper loaded message:

    • Check if the paper tray is empty.
    • Re-insert the paper and ensure it is aligned correctly with the guides.

  • Paper jams:

    • Open the printer front cover and remove any jammed paper.
    • Ensure that the paper is not folded, torn, or damp.

  • Print quality issues:

    • Check the toner level and replace if necessary.
    • Clean the drum unit and fuser unit.
    • Adjust the print quality settings in the printer driver.

  • Network connection issues:

    • Ensure that the Ethernet cable or Wi-Fi connection is secure.
    • Check if the printer’s network settings are configured correctly.
    • Contact your network administrator for assistance.

Download Xerox Phaser 6350DT Driver

Ensure your device is fully compatible with the latest drivers for the Xerox Phaser 6350DT. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver