Xerox Phaser 8550DP – Driver Download, Setup and User Guide

Advertisement

Setting Up the Xerox Phaser 8550DP

Unboxing and Assembly

  1. Remove the Xerox Phaser 8550DP from the packaging.
  2. Place the printer on a stable, level surface.
  3. Open the front cover and remove the packing materials and toners.
  4. Close the front cover.

Network Configuration

  1. Connect the printer to your network using an Ethernet cable.
  2. For wired network connections:
    a. Assign an IP address to the printer using the control panel.
    b. Set the network settings, including the subnet mask and default gateway.
  3. For wireless network connections:
    a. Connect your printer to a Wi-Fi network using the control panel.
    b. Enter the network password and follow the on-screen prompts.

Installing Drivers

  1. Insert the Xerox Phaser 8550DP Driver CD into your computer.
  2. Run the installation wizard and follow the on-screen instructions.
  3. Select “Network” as the connection type and enter the printer’s IP address.
  4. Complete the installation process.

Initial Setup

  1. Turn on the printer.
  2. Navigate to the control panel and select “System.”
  3. Set the language, time, and date.
  4. Configure the default paper settings, such as paper size and type.

Troubleshooting Common Issues

Printer Won’t Print

  • Check if the printer is connected to the network and power.
  • Ensure that the paper tray is properly loaded and the paper is not jammed.
  • Verify that the toner cartridge is properly installed.
  • Reset the printer by turning it off and back on.

Poor Print Quality

  • Check if the toner cartridge is genuine and not low on ink.
  • Clean the print head using the maintenance utilities in the control panel.
  • Adjust the paper type settings in the printer properties.

Network Connection Issues

  • Verify that the printer is connected to the network with a working Ethernet cable.
  • Check if the TCP/IP settings are correct on the printer and the computer.
  • Reset the network settings on the printer by accessing the control panel.

Paper Jams

  • Open the paper tray and gently remove any jammed paper.
  • Clear any debris or foreign objects from the paper path.
  • Adjust the paper tray guides to fit the paper size correctly.

Other Issues

  • Excessive Noise: Clean the rollers and fuser using a soft cloth.
  • LCD Screen Not Displaying: Check the power connection and try resetting the printer.
  • Error Messages: Refer to the user manual or contact Xerox technical support for error message troubleshooting.

Download Xerox Phaser 8550DP Driver

Ensure your device is fully compatible with the latest drivers for the Xerox Phaser 8550DP. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver