Brother HL-2035 – Driver Download, Setup and User Guide

Advertisement

Installation Guide for Brother HL-2035 Laser Printer

Hardware Setup

  1. Unpack the printer and remove all packaging materials.
  2. Connect the power cord to the printer and a power outlet.
  3. Open the front cover.
  4. Remove the protective cover from the toner cartridge.
  5. Insert the toner cartridge into the printer.
  6. Close the front cover.
  7. Pull out the paper tray.
  8. Load paper into the tray with the print side facing down.
  9. Adjust the paper guides to fit the paper size.
  10. Insert the paper tray back into the printer.

Software Installation

Windows:

  1. Insert the installation CD into your computer.
  2. Follow the on-screen instructions to install the printer driver.
  3. When prompted, connect the printer to your computer using a USB cable.

Mac:

  1. Connect the printer to your Mac using a USB cable.
  2. Go to System Preferences > Printers & Scanners.
  3. Click the + button and select Add Printer or Scanner.
  4. Select the Brother HL-2035 printer and click Add.

Troubleshooting Common Issues

Printer does not print:

  • Check if the printer is properly connected and powered on.
  • Make sure there is paper in the paper tray.
  • Check if the toner cartridge is installed correctly.
  • Try restarting the printer.

Printouts are blurry or faded:

  • Clean the corona wire inside the printer.
  • Replace the toner cartridge.
  • Adjust the print quality settings in the printer driver.

Printer shows an error message:

  • “Out of paper”: Load more paper into the tray.
  • “Toner low”: Replace the toner cartridge.
  • “Paper jam”: Remove the paper jam from the printer.
  • “Fuser error”: Contact Brother support for assistance.

Printer is slow:

  • Reduce the print quality settings in the printer driver.
  • Turn off unnecessary features, such as duplex printing.
  • Make sure the computer is not running other demanding programs while printing.

Cannot connect to the printer over Wi-Fi:

  • Ensure that Wi-Fi is enabled on the printer.
  • Check if the printer is connected to the same Wi-Fi network as your computer.
  • Reset the printer’s Wi-Fi settings and reconnect.

Other tips:

  • Keep the printer clean to prevent paper jams and other issues.
  • Use genuine Brother toner cartridges for optimal print quality.
  • Update the printer driver regularly to ensure compatibility with your operating system.
  • Refer to the user manual for more detailed troubleshooting information.

Download Brother HL-2035 Driver

Ensure your device is fully compatible with the latest drivers for the Brother HL-2035. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver