Brother HL-2130 Series – Driver Download, Setup and User Guide

Advertisement

Step-by-Step Guide to Setting Up the Brother HL-2130 Series Printer

Materials Required:

  • Brother HL-2130 Series printer
  • Printer cable (USB or Ethernet)
  • Power cord
  • Ink cartridge (if not pre-installed)
  • Paper

Step 1: Unpack and Prepare the Printer

  • Unpack the printer and remove all packaging materials.
  • Insert the ink cartridge into the designated slot until it clicks into place.
  • Connect the power cord to the printer and a power outlet.

Step 2: Connect to Computer

  • Connect the printer to your computer using the USB or Ethernet cable provided.
  • If using USB, plug one end into the printer and the other into an available USB port on your computer.
  • If using Ethernet, connect one end to the printer and the other to your network router.

Step 3: Install Printer Drivers

  • Insert the installation CD into your computer’s CD/DVD drive.
  • Follow the on-screen instructions to install the printer drivers.

Step 4: Configure Network Settings (Ethernet Only)

  • Open the printer’s control panel by pressing the “Menu” button.
  • Navigate to “Network” and select “TCP/IP”.
  • Enter the IP address, subnet mask, gateway, and DNS settings provided by your network administrator.

Step 5: Initialize the Printer

  • After the driver installation is complete, turn on the printer.
  • The printer will perform an initialization process, which may take several minutes.

Step 6: Load Paper

  • Open the paper tray and adjust the paper guides to the appropriate size.
  • Insert the paper stack into the tray and close the tray.

Step 7: Print a Test Page

  • Open the “Control Panel” on your computer.
  • Go to “Printers and Scanners” or “Devices and Printers”.
  • Select the Brother HL-2130 Series printer.
  • Click on “Print a Test Page”.

Troubleshooting Common Issues:

Printer Not Recognized

  • Ensure the printer is turned on and connected to your computer.
  • Check if the printer drivers are installed correctly.
  • Restart the printer and computer.

Printing Blank Pages

  • Check if the ink cartridge has ink.
  • Make sure the paper tray is not empty.
  • Clean the printhead.

Paper Jams

  • Open the paper tray and remove any jammed paper.
  • Check for any bent or crumpled paper in the printer.
  • Gently pull out the jammed paper.

Network Connection Problems

  • Check the Ethernet cable connection between the printer and router.
  • Verify that the network settings in the printer’s control panel are correct.
  • Reset the printer’s network settings to factory defaults.

Additional Tips:

  • Use genuine Brother ink cartridges for optimal performance.
  • Periodically clean the printhead to prevent clogging.
  • Check the paper type and settings to ensure compatibility.
  • Refer to the user manual for more specific instructions and troubleshooting solutions.

Download Brother HL-2130 Series Driver

Ensure your device is fully compatible with the latest drivers for the Brother HL-2130 Series. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver