Brother MFC-J5720DW – Driver Download, Setup and User Guide

Advertisement

Setting Up the Brother MFC-J5720DW: A Comprehensive Guide

Unboxing and Initial Setup

  1. Remove the printer from the box and place it on a stable surface.
  2. Remove all protective packaging materials.
  3. Install the ink cartridges (four cartridges: black, cyan, magenta, yellow) by following the instructions on the printer’s LCD screen.
  4. Connect the power cord to the printer and a power outlet.
  5. Turn on the printer using the power button.

Connecting to a Wireless Network

  1. From the printer’s control panel, navigate to “Network” > “Wireless”.
  2. Select “Wireless LAN Setup Wizard”.
  3. Choose your wireless network from the list of available networks.
  4. Enter your network password.
  5. The printer will connect to the wireless network.

Connecting to a Wired Network

  1. Connect one end of an Ethernet cable to the printer’s Ethernet port.
  2. Connect the other end of the cable to a router or switch.
  3. The printer will automatically configure itself to connect to the wired network.

Troubleshooting Common Issues

Connection Problems

  • Ensure that the printer is powered on and connected to power.
  • Verify that the wireless network is active and within range.
  • Check that the network password is correct.
  • Reset the printer to factory defaults: Press and hold the “Stop/Clear” button for at least five seconds.

Printing Problems

  • Check that the correct paper size and media type are selected in the printer settings.
  • Ensure that there is paper loaded in the paper tray.
  • If the ink level is low, replace the corresponding cartridge.
  • Clean the printhead according to the printer’s instructions.

Scanning Problems

  • Place the document on the scanner glass face down.
  • Check that the scanner lid is closed properly.
  • Make sure that the scanning driver is installed on your computer.
  • Clean the scanner glass to remove any smudges or debris.

Other Issues

  • Paper Jams: Remove any jammed paper carefully. Avoid tearing the paper.
  • Low Ink Alerts: Replace the indicated cartridge with a new one.
  • Error Messages: Refer to the printer’s user manual for specific error codes and troubleshooting steps.

Download Brother MFC-J5720DW Driver

Ensure your device is fully compatible with the latest drivers for the Brother MFC-J5720DW. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver