Brother MFC-J860DN – Driver Download, Setup and User Guide

Advertisement

Detailed Guide for Setting Up the Brother MFC-J860DN

Hardware Setup

  1. Unpack the printer: Remove the printer from the box and discard the packaging.

  2. Install the ink cartridges: Open the front cover of the printer and remove any protective material from the ink cartridge slots. Install the color ink cartridges into their respective slots and push down until they click into place.

  3. Load paper: Open the paper tray, adjust the paper guides to the paper size you are using, and load the paper.

  4. Connect the printer: You can connect the printer to your computer or network using a USB cable or wirelessly. For a USB connection, plug one end of the cable into the printer and the other end into an available USB port on your computer. For a wireless connection, follow the instructions in the Brother MFC-J860DN User Guide.

  5. Turn on the printer: Press the power button on the front panel of the printer.

Software Installation

  1. Download the drivers: Go to the Brother website and download the latest drivers for the MFC-J860DN.

  2. Install the drivers: Run the downloaded file and follow the on-screen prompts to install the drivers.

  3. Configure network settings (for wireless connections): Once the drivers are installed, you will need to configure the printer’s network settings. This can be done through the printer’s control panel or the Brother ControlCenter software.

Troubleshooting Common Issues

Printer not recognized:

  • Check if the printer is properly connected to your computer or network.
  • Make sure that the correct drivers are installed.
  • Restart the printer and your computer.

Paper jam:

  • Open the paper tray and remove any jammed paper.
  • Check for any debris or torn paper that may be causing the jam.
  • Reinsert the paper and try printing again.

Print quality issues:

  • Check the ink levels and replace any empty cartridges.
  • Clean the print heads by following the instructions in the user guide.
  • Try using different paper types.

Scanner not working:

  • Check if the scanner cable is properly connected to the printer.
  • Make sure that the scanner drivers are installed.
  • Restart the printer and your computer.

Error messages:

  • Refer to the Brother MFC-J860DN User Guide for specific error messages and troubleshooting steps.

Additional Tips:

  • Register your printer with Brother to receive the latest updates and support.
  • Use Brother’s ControlCenter software to manage your printer’s settings and perform troubleshooting tasks.
  • Keep the printer firmware up to date for optimal performance.

Download Brother MFC-J860DN Driver

Ensure your device is fully compatible with the latest drivers for the Brother MFC-J860DN. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver