Brother MW-140BT – Driver Download, Setup and User Guide

Advertisement

Detailed Guide to Setting Up the Brother MW-140BT

Step 1: Unboxing and Assembly

  1. Remove the printer from the box and place it on a flat, stable surface.
  2. Attach the paper input tray to the printer.
  3. Insert two AA alkaline batteries into the battery compartment.

Step 2: Powering On and Connecting

  1. Press the power button on the printer to turn it on.
  2. Ensure Bluetooth is enabled on your mobile device or computer.
  3. Search for “MW-140BT” in the Bluetooth settings and select it to pair.

Step 3: Installing the Printer Driver (For Computers Only)

  1. Visit the Brother website and download the latest driver for your operating system.
  2. Run the downloaded file and follow the on-screen prompts to install the driver.

Step 4: Printing Wirelessly

From a Mobile Device:

  1. Open the document or image you want to print on your mobile device.
  2. Select the “Share” option and choose “Print.”
  3. Select the Brother MW-140BT printer.

From a Computer:

  1. Open the document or image you want to print on your computer.
  2. Select “File” > “Print.”
  3. Choose the Brother MW-140BT printer as the destination.

Troubleshooting Common Issues

Printer Not Detected by Bluetooth:

  • Ensure Bluetooth is enabled on both the printer and the connecting device.
  • Check if the printer is in pairing mode (usually indicated by a flashing LED).
  • Restart both the printer and the connecting device.
  • Try pairing the printer with another device to eliminate connectivity issues.

Printing Quality Issues:

  • Ensure the printer is using compatible paper.
  • Check if the print head is clean. Follow the instructions in the printer manual for cleaning the print head.
  • Adjust the print settings on your computer or mobile device to optimize the printing quality.

Low Battery Indicated:

  • Replace the batteries with new ones.
  • Check if the battery contacts are clean and free of corrosion.
  • Ensure the printer is not in sleep mode.

Printer Not Responding:

  • Restart the printer by turning it off and on.
  • Check if there are any paper jams or foreign objects obstructing the printer.
  • Reset the printer to factory settings by pressing and holding the power button for 5 seconds.

Other Issues:

  • For further assistance, refer to the Brother MW-140BT user manual or contact Brother customer support.

Download Brother MW-140BT Driver

Ensure your device is fully compatible with the latest drivers for the Brother MW-140BT. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver