Canon PIXMA MG5570 – Driver Download, Setup and User Guide

Advertisement

Detailed Guide to Setting Up the Canon PIXMA MG5570

Step 1: Unpacking and Initial Setup

  • Remove the printer from the box and discard the packaging materials.
  • Place the printer on a flat, stable surface.
  • Remove the protective covers from the ink tanks and power cord.
  • Connect the power cord to the printer and a power outlet.

Step 2: Installing the Ink Tanks

  • Open the front cover of the printer.
  • Press down on the ink tank cap to release it and remove the cap.
  • Align the new ink tank with the corresponding color slot and insert it until it clicks into place.
  • Repeat this process for all four ink tanks.

Step 3: Loading Paper

  • Open the rear paper tray.
  • Adjust the paper guides to fit the paper size you are using.
  • Load the paper into the tray and close the tray.

Step 4: Connecting to Your Device

  • Wi-Fi Connection:
    • Ensure the printer is connected to power and the Wi-Fi network is active.
    • On your computer or mobile device, go to the Wi-Fi settings.
    • Locate the “DIRECT-CanonMG5570XXXX” network and connect to it.
    • Once connected, open a web browser and type “http://ij.start.cannon” into the address bar.
    • Follow the on-screen instructions to complete the Wi-Fi setup.
  • USB Connection:
    • Connect one end of the USB cable to your computer and the other end to the USB port on the back of the printer.
    • The printer will automatically detect and install the necessary drivers.

Step 5: Printing a Test Page

  • On your computer or mobile device, open the desired printing application.
  • Select the Canon PIXMA MG5570 as your printer.
  • Click on “Print” to print a test page.

Troubleshooting Common Issues

Printer Not Connecting to Wi-Fi:

  • Check if the printer and your device are connected to the same Wi-Fi network.
  • Make sure the Wi-Fi connection on the printer is turned on.
  • Reset the printer by turning it off and then back on.
  • Restart your Wi-Fi router.

Paper Jam:

  • Open the rear paper tray and pull out the jammed paper gently.
  • Remove any torn pieces of paper.
  • Re-load the paper into the tray and ensure it is loaded correctly.

Print Quality Issues:

  • Check if the ink levels are sufficient.
  • Clean the print head by following the instructions in the printer’s user manual.
  • Use high-quality paper recommended for your printer.
  • Ensure the correct paper type is selected in the printing settings.

Other Issues:

  • Printer not turning on: Check if the power cord is properly connected and the power outlet is working.
  • Ink not recognized: Remove the ink tanks and reinsert them firmly. Reset the printer by turning it off and then back on.
  • Error messages: Refer to the printer’s user manual for specific error codes and troubleshooting steps.

If you are unable to resolve the issue using the above troubleshooting steps, contact Canon’s customer support for further assistance.

Download Canon PIXMA MG5570 Driver

Ensure your device is fully compatible with the latest drivers for the Canon PIXMA MG5570. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver