Canon PIXMA MX395 – Driver Download, Setup and User Guide

Advertisement

Step-by-Step Guide to Setting Up the Canon PIXMA MX395

Unboxing and Preparation

  1. Remove the printer from the box and place it on a stable surface.
  2. Open the top cover and remove the orange protective tape from the ink cartridges.
  3. Insert the ink cartridges into their designated slots until they click into place.

Hardware Connection

  1. Connect the power cord to the printer and a power outlet.
  2. Use a USB cable to connect the printer to your computer.
  3. If using a wireless connection, refer to the “Wireless Setup” section below.

Software Installation

  1. Insert the included CD-ROM into your computer’s disc drive.
  2. Follow the on-screen prompts to install the necessary drivers and software.
  3. Select “Yes” when prompted to install the Canon IJ Status Monitor utility.

Wireless Setup

  1. WPA/WPA2 Encryption (Recommended):
    • Press and hold the “Wi-Fi” button on the printer for about 5 seconds until the Wi-Fi lamp flashes rapidly.
    • Within 2 minutes, press the “WPS” button on your router.
    • Wait until the Wi-Fi lamp on the printer stops flashing and remains lit.
  2. WEP Encryption:
    • Press and hold the “Wi-Fi” button on the printer for about 5 seconds until the Wi-Fi lamp flashes rapidly.
    • Enter your WEP key using the printer’s control panel.
    • Press the “OK” button to save the settings.

Troubleshooting Common Issues

Printer Not Recognized:

  • Ensure the USB cable is securely connected to the printer and computer.
  • Restart your computer and the printer.
  • Reinstall the printer drivers from the CD-ROM.

Print Quality Issues:

  • Clean the print heads by following the instructions in the printer’s manual.
  • Check the ink levels and replace any empty cartridges.
  • Adjust the print quality settings in the printer’s software.

Wireless Connection Problems:

  • Ensure your router is within range of the printer.
  • Check if the Wi-Fi password entered is correct.
  • Restart the printer and router.
  • If the issue persists, try performing a hard reset by unplugging the printer for 10 minutes and then plugging it back in.

Scanning Issues:

  • Ensure the scanner cover is open and the document is properly placed on the platen.
  • Check the resolution settings and adjust them if necessary.
  • Clean the scanner glass using a soft cloth.

Other Common Issues:

  • Paper Jam: Open the printer’s cover and remove the jammed paper carefully.
  • Ink Smudging: Clean the print head and ensure the paper type is suitable for printing.
  • Printer Display Shows Error: Refer to the printer’s manual for the specific error code and follow the troubleshooting instructions.

Download Canon PIXMA MX395 Driver

Ensure your device is fully compatible with the latest drivers for the Canon PIXMA MX395. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver