Epson EM 930C – Driver Download, Setup and User Guide

Advertisement

Epson EM 930C Setup Guide

Unboxing and Initial Setup

  1. Unpack the Epson EM 930C printer and check for all components, including the printer, power cord, USB cable (optional), and ink cartridges.
  2. Remove the protective packaging from the printer and open the top cover.
  3. Remove the foam blocks from the printhead transport area.
  4. Install the ink cartridges by aligning the dots on the cartridge with the corresponding dots on the printhead. Snap the cartridges into place.
  5. Close the top cover and turn on the printer.
  6. Select the language and country settings on the printer’s control panel.
  7. Follow the on-screen instructions to connect the printer to a Wi-Fi network or to a computer using the USB cable.

Software Installation

  1. Insert the Epson software CD into your computer’s CD/DVD drive.
  2. Follow the on-screen instructions to install the printer driver and Epson Scan software.
  3. Select the “Install” or “Run” option when prompted.
  4. Accept the license agreement and follow the remaining prompts to complete the software installation.

Printer Configuration

  1. Open the “Printers” or “Printers & Scanners” settings on your computer.
  2. Right-click (or Control-click on Mac) on the Epson EM 930C printer name and select “Printer Properties.”
  3. Configure the printer settings such as paper size, orientation, and print quality.
  4. Set the printer as the default printer if desired.

Troubleshooting Common Issues

Printer Not Printing

  • Check that the printer is turned on and connected to a power source.
  • Ensure that the ink cartridges are properly installed and have sufficient ink levels.
  • Run a nozzle check from the printer’s control panel to see if any nozzles are clogged.
  • Clean the printhead according to the manufacturer’s instructions.
  • Check that the paper is loaded correctly in the paper tray.

Wi-Fi Connection Problems

  • Make sure that the printer and computer are connected to the same Wi-Fi network.
  • Check that the Wi-Fi password is correct.
  • Reset the printer’s network settings by pressing and holding the Wi-Fi button for several seconds.

Scan Issues

  • Ensure that the scanner cover is closed before attempting to scan.
  • Place the document to be scanned on the scanner’s glass surface.
  • Open the Epson Scan software and select the appropriate settings.
  • Start the scanning process and follow the on-screen instructions.

Print Quality Issues

  • Adjust the print quality settings in the printer driver.
  • Use high-quality paper suitable for the type of printing you are performing.
  • Clean the printhead if there are any streaks or missing dots in the printed output.

Other Issues

  • If the printer does not respond to commands, unplug it from the power source and then plug it back in.
  • Reset the printer to factory defaults by pressing and holding the reset button on the control panel for several seconds.
  • Contact Epson customer support if the issue persists.

Download Epson EM 930C Driver

Ensure your device is fully compatible with the latest drivers for the Epson EM 930C. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver