Epson PM-T990 – Driver Download, Setup and User Guide

Advertisement

Setting Up the Epson PM-T990 Projector

Unpacking and Setup

  1. Unpack the projector and its accessories, which include:

    • Remote control
    • Two AAA batteries
    • Power cord
    • User manual

  2. Place the projector on a stable surface and connect the power cord.

  3. Insert the batteries into the remote control.

  4. Turn on the projector using the power button on the top panel or the remote control.

Adjusting the Projection Settings

  1. Use the focus ring on the lens to adjust the sharpness of the image.

  2. Adjust the keystone correction using the buttons on the projector panel or the remote control. This corrects the trapezoidal distortion that can occur when the projector is not perpendicular to the screen.

  3. Use the zoom lever on the lens to adjust the image size.

  4. Adjust the brightness and contrast using the buttons on the projector panel or the remote control.

Connecting to Input Sources

  1. Connect your laptop or other input device to the projector’s HDMI port using a HDMI cable.

  2. To connect via VGA, use a VGA cable and connect it to the projector’s VGA port.

  3. For wireless connection, follow the instructions in the user manual to establish a wireless network between the projector and your device.

Troubleshooting Common Issues

Problem: No image is projected.

  • Solution: Ensure that the power cord is properly connected and the projector is turned on. Check the HDMI or VGA cable connections and make sure they are secure.

Problem: The image is blurry.

  • Solution: Adjust the focus ring on the lens to sharpen the image.

Problem: The image is distorted.

  • Solution: Adjust the keystone correction using the buttons on the projector panel or the remote control.

Problem: The remote control is not working.

  • Solution: Ensure that the batteries are inserted correctly and are not depleted. If necessary, replace the batteries. Aim the remote control directly at the projector’s IR sensor.

Problem: The projector overheats.

  • Solution: Ensure that the projector is placed in a well-ventilated area with good airflow. Clean the air filters regularly to remove any dust or debris.

Problem: The projector keeps turning off.

  • Solution: Check the power cord for any damage and ensure it is securely plugged into the projector and outlet. Reset the projector by unplugging it for 10 seconds and plugging it back in.

Additional Tips:

  • Position the projector far enough from the screen to create the desired image size.
  • Use a projection screen or a white wall for optimal image quality.
  • Calibrate the colors and contrast using the projector’s built-in tools.
  • Clean the projector lens and air filters regularly to maintain optimal performance.

Download Epson PM-T990 Driver

Ensure your device is fully compatible with the latest drivers for the Epson PM-T990. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver