EPSON WF-8590 Series – Driver Download, Setup and User Guide

Advertisement

Step-by-Step Guide to Setting Up the EPSON WF-8590 Series Printer

Unboxing and Preparation

  1. Unpack the printer and remove all protective materials.
  2. Place the printer on a stable, flat surface.
  3. Connect the power cord to the printer and a power outlet.
  4. Turn on the printer.

Software Installation

  1. Insert the included CD into your computer’s optical drive.
  2. Follow the onscreen instructions to install the printer drivers and software.
  3. If prompted, connect the printer to your computer using the included USB cable.

Network Setup

  1. Open the printer’s control panel (the top-right LCD screen).
  2. Navigate to the Network menu and select “Wi-Fi setup.”
  3. Select your Wi-Fi network from the list and enter your password.
  4. The printer will connect to your network.

Paper Loading

  1. Open the front paper tray.
  2. Adjust the paper guides to the width of your paper.
  3. Load the paper into the tray and push it in until it stops.

Printing a Test Page

  1. Open any document or image on your computer.
  2. Click “Print” and select the EPSON WF-8590 Series printer.
  3. Click “Print” to print a test page.

Troubleshooting Common Issues

Printer Not Printing

  • Check the power connection and ensure that the printer is turned on.
  • Verify that the printer is properly connected to your computer or network.
  • Reset the printer by unplugging it for a minute and then plugging it back in.
  • Ensure that there is sufficient ink in the cartridges.
  • Reinstall the printer drivers and software.

Paper Jams

  • Locate the paper jam by opening the front or rear paper tray.
  • Remove the jammed paper carefully.
  • Adjust the paper guides to ensure a snug fit for the paper.
  • Reload the paper into the tray.

Print Quality Issues

  • Check the ink cartridges for proper installation and ink levels.
  • Verify that the paper type you are using is compatible with your printer.
  • Clean the print head nozzles using the built-in cleaning utility.
  • Align the print head using the printer’s control panel.

Network Connectivity Problems

  • Ensure that your Wi-Fi network is functioning properly.
  • Check that the printer has been assigned an IP address.
  • Reset the printer’s network settings and re-configure it to your network.
  • Try connecting the printer via USB and then switching to Wi-Fi once the initial setup is complete.

Download EPSON WF-8590 Series Driver

Ensure your device is fully compatible with the latest drivers for the EPSON WF-8590 Series. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver