HP DesignJet T1708 PostScript – Driver Download, Setup and User Guide

Advertisement

Comprehensive Guide to Setting Up the HP DesignJet T1708 PostScript Printer

Step-by-Step Setup Instructions

1. Unpack and Assemble

  • Remove the printer from the box and remove all packing materials.
  • Assemble the printer stand and paper tray according to the included instructions.
  • Install the ink cartridges as indicated in the user manual.

2. Connect the Printer

  • Plug the printer into a grounded power outlet.
  • Connect the USB cable from the printer to your computer.
  • If using a network connection, connect an Ethernet cable from the printer to your network router.

3. Install the Driver

  • Visit HP’s website to download the latest driver for your operating system.
  • Run the installer and follow the on-screen instructions.
  • Select “Connect over USB” or “Network” based on your chosen connection type.

4. Configure the Printer

  • Open the Control Panel or System Preferences on your computer.
  • Select “Printers & Scanners” or “Printers”.
  • Click “Add Printer” and select the HP DesignJet T1708 PostScript.
  • Configure any additional settings as needed, such as default paper size and print quality.

Troubleshooting Common Issues

1. The Printer Does Not Turn On

  • Ensure the power cord is securely connected to the printer and power outlet.
  • Reset the printer by turning it off, waiting 30 seconds, and then turning it back on.

2. The Printer Is Not Printing

  • Check if the printer is properly connected to the computer or network.
  • Make sure the ink cartridges are installed correctly and have sufficient ink.
  • Clear any paper jams by following the instructions in the user manual.
  • Check if the print job is paused or canceled on the printer’s display.

3. The Prints Are Faded or Blurry

  • Calibrate the printer using the HP DesignJet Utility.
  • Replace the ink cartridges with genuine HP cartridges.
  • Check the print quality settings in the driver and adjust accordingly.

4. The Printer Is Printing Blank Pages

  • Ensure that paper is loaded in the tray and is not folded or torn.
  • Check if the print job is set to print on the correct paper size.
  • Restart the printer and computer.

5. Error Messages

  • “Out of Paper”: Load more paper in the tray.
  • “Paper Jam”: Clear the paper jam according to the user manual.
  • “Low Ink”: Replace the low ink cartridges.
  • “Printer Offline”: Check the printer connection and restart the printer.

Additional Tips

  • Regularly clean the printer nozzles and printhead to maintain optimal print quality.
  • Use genuine HP ink cartridges to ensure consistent results.
  • Update the printer firmware to get the latest bug fixes and improvements.
  • Familiarize yourself with the printer’s control panel and display for troubleshooting and status updates.

By following these steps and troubleshooting common issues, you can ensure a seamless setup and operation of your HP DesignJet T1708 PostScript printer.

Download HP DesignJet T1708 PostScript Driver

Ensure your device is fully compatible with the latest drivers for the HP DesignJet T1708 PostScript. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver