HP Designjet T930 Postscript – Driver Download, Setup and User Guide

Advertisement

Comprehensive Guide to Setting Up the HP Designjet T930 PostScript Printer

Prerequisites

Hardware:

  • HP Designjet T930 PostScript printer
  • Computer with a PostScript driver installed
  • Network cable (optional for network setup)

Software:

  • PostScript driver for your operating system

Step-by-Step Setup Guide

1. Unpack and Assemble the Printer

  • Unpack the printer and remove all protective materials.
  • Assemble the ink cartridges and printhead.
  • Install the paper rolls or sheets.

2. Connect the Printer

USB Connection:
* Connect the USB cable to your computer and the printer.

Network Connection (optional):
* Connect the network cable to the printer and your network router.
* Configure the printer’s network settings using the front panel menu.

3. Install the PostScript Driver

  • Download the latest PostScript driver from HP’s website.
  • Run the installation file and follow the on-screen instructions.

4. Configure the Printer

  • Open the printer’s front panel menu.
  • Navigate to the “Setup and Maintenance” section.
  • Configure the following settings:
    • Paper size and type
    • Color mode
    • Print quality

5. Test Print

  • Print a test page to verify the printer is working correctly.

Troubleshooting Common Issues

Print Quality Issues:

  • Blurry or distorted prints: Clean the printhead or replace the ink cartridges.
  • Horizontal lines: Calibrate the printer’s head alignment.
  • Vertical lines: Replace the ink cartridges or check the paper type and orientation.

Paper Handling Issues:

  • Paper jams: Check for obstructions in the paper path or adjust the media settings.
  • Paper not loading: Verify that the paper is loaded correctly and the paper tray is closed properly.
  • Paper skew: Adjust the paper guides or check the paper orientation.

Network Issues:

  • Printer not found on the network: Verify that the network cable is securely connected and the router is functioning.
  • Connection drops: Check the network configuration settings and ensure there are no network conflicts.
  • Slow print speeds: Optimize the network settings for printer traffic and consider using a wired connection instead of wireless.

Other Issues:

  • Printer not responding: Restart the printer and check the power connections.
  • Errors on the front panel: Refer to the printer’s user manual for guidance on error codes.
  • Ink levels low: Replace the depleted ink cartridges.

Conclusion

Setting up the HP Designjet T930 PostScript printer is a straightforward process that can be completed in a few steps. By following the instructions outlined in this guide, you can ensure the printer is properly configured and ready to deliver high-quality prints. If you encounter any issues during the setup process, refer to the troubleshooting section or consult HP’s technical support.

Download HP Designjet T930 Postscript Driver

Ensure your device is fully compatible with the latest drivers for the HP Designjet T930 Postscript. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver