HP Envy 4520 All-in-one Printer Series – Driver Download, Setup and User Guide
Advertisement
Detailed Guide to Setting Up the HP Envy 4520 All-in-One Printer Series
Unboxing and Hardware Setup
- Unpack the printer and all its components, including the power cord, USB cable, and ink cartridges.
- Remove the protective tape and packaging from the printer.
- Connect the power cord to the printer and a power outlet.
- Insert the ink cartridges into the designated slots on the printer.
- Load paper into the input tray.
Software Installation
- On your computer, go to HP’s website: https://support.hp.com/us-en/drivers/printers.
- Search for the HP Envy 4520 printer series and download the latest software installer.
- Run the installer and follow the on-screen instructions.
Wireless Setup
Wi-Fi Direct:
- On the printer control panel, press the “Wireless” button.
- Select “Wi-Fi Direct” and then press “OK.”
- On your computer or mobile device, connect to the printer’s Wi-Fi network using the SSID and password displayed on the printer.
HP Smart App:
- Download the HP Smart app on your mobile device.
- Open the app and tap “Set Up a Printer.”
- Select the HP Envy 4520 printer and follow the instructions on the app to connect to the Wi-Fi network.
Router Setup:
- Connect the printer to your computer via USB cable.
- On the printer control panel, press the “Wireless” button.
- Select “Wireless Setup Wizard” and then press “OK.”
- Follow the on-screen instructions to connect the printer to your wireless network.
Troubleshooting Common Issues
Printer Not Found:
- Check that the printer is turned on and connected to the same Wi-Fi network as your computer.
- Make sure the firewall is not blocking access to the printer.
- Check the USB cable connections.
Printing Issues:
- Check if there is paper loaded in the input tray.
- Ensure that the ink cartridges are correctly installed.
- Clean the print heads following the instructions in the user manual.
- Verify that the printer driver is installed correctly.
Scanning Issues:
- Place the document on the scanner glass correctly.
- Check if the printer is connected to the computer via USB cable or Wi-Fi.
- Make sure the HP Scan software is installed on your computer.
Wi-Fi Connection Issues:
- Reset the printer by pressing and holding the Power button for 10 seconds.
- Turn off the router and printer, then turn them back on to establish a new connection.
- Try setting up the printer using WPS instead of manual configuration.
Download HP Envy 4520 All-in-one Printer Series Driver
Ensure your device is fully compatible with the latest drivers for the HP Envy 4520 All-in-one Printer Series. Downloading and installing the correct driver software is essential for optimal functionality and performance.