HP LaserJet Pro m701a Printer – Driver Download, Setup and User Guide

Advertisement

Setting Up the HP LaserJet Pro m701a Printer

Unboxing and Preparation

  • Remove the printer from its packaging and place it on a stable, flat surface.
  • Remove all protective tape and packaging materials.
  • Open the front cover and remove the toner cartridge and imaging drum.
  • Remove the orange shipping locks from the toner cartridge and imaging drum.

Installing the Toner and Imaging Drum

  • Insert the toner cartridge into the printer, aligning it with the guides.
  • Insert the imaging drum into the printer, aligning it with the guides.
  • Close the front cover.

Connecting the Printer

Ethernet:
* Connect an Ethernet cable from the printer to a network port.

Wireless:
* On the printer’s control panel, go to “Wireless > Wi-Fi Setup Wizard”.
* Follow the on-screen instructions to connect to your wireless network.

USB:
* Connect the USB cable from the printer to a computer.

Installing the Drivers and Software

  • Insert the HP installation disc into your computer.
  • Follow the on-screen instructions to install the drivers and software.

Troubleshooting Common Issues

Printer not responding:
* Check if the printer is turned on and connected to a power source.
* Restart the printer by unplugging it and plugging it back in.
* Check if any error messages are displayed on the control panel.

Paper jams:
* Open the rear door and remove any jammed paper.
* Close the rear door and try printing again.
* If the paper jam persists, contact HP support.

Print quality issues:
* Check if the toner cartridge is low and needs to be replaced.
* Clean the imaging drum by opening the front cover and wiping it with a soft, dry cloth.
* Adjust the print quality settings from the printer’s control panel or computer software.

Wireless connectivity issues:
* Check if the printer is connected to the same wireless network as your computer.
* Restart the printer and your router/modem.
* Ensure there are no physical obstructions between the printer and the router/modem.

USB connectivity issues:
* Ensure the USB cable is properly connected to both the printer and computer.
* Try using a different USB cable.
* Restart the computer and the printer.

Error messages:
* Note down the exact error message and refer to the HP support website or user manual for troubleshooting steps.

Download HP LaserJet Pro m701a Printer Driver

Ensure your device is fully compatible with the latest drivers for the HP LaserJet Pro m701a Printer. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver