HP LaserJet Pro MFP m130fn – Driver Download, Setup and User Guide

Advertisement

HP LaserJet Pro MFP m130fn Setup Guide

Introduction:

The HP LaserJet Pro MFP m130fn is a versatile multifunction printer that offers printing, scanning, copying, and faxing capabilities. This comprehensive guide will walk you through the step-by-step setup process and provide troubleshooting tips for common issues you may encounter.

Unboxing and Setup:

  1. Unpack the printer and all its components.
  2. Remove all packaging materials and protective tapes.
  3. Place the printer on a stable, flat surface near a power outlet.
  4. Connect the power cord to the printer and to a power outlet.
  5. Open the toner cartridge compartment and remove the orange protective cap.
  6. Insert the new toner cartridge into the printer.
  7. Close the toner cartridge compartment.
  8. Open the output tray.

Driver and Software Installation:

  1. Insert the HP software CD into your computer.
  2. Follow the on-screen prompts to install the drivers and software.
  3. If you don’t have the software CD, download the latest drivers from HP’s website (https://support.hp.com/us-en).
  4. Select your printer model and operating system to download the appropriate drivers.

Network Configuration:

  1. Connect the Ethernet cable to the printer and to your network router.
  2. On the printer’s control panel, navigate to the Settings menu.
  3. Select Network and then Wired (Ethernet).
  4. Follow the on-screen prompts to configure your network settings.
  5. If you prefer to use Wi-Fi, navigate to Settings > Network > Wireless.
  6. Select your Wi-Fi network and enter the password.

Paper Loading:

  1. Open the input tray.
  2. Fan the paper to separate the sheets.
  3. Load the paper into the input tray with the printable side facing up.
  4. Adjust the paper guides to fit the paper size.

Troubleshooting Common Issues:

Printer Not Printing:

  • Check if the printer is turned on and connected to power.
  • Ensure that the toner cartridge is properly installed.
  • Verify that the paper tray is loaded with paper and the paper guides are adjusted correctly.
  • Restart the printer by turning it off and then back on.

Paper Jams:

  • Open the input tray and remove any jammed paper.
  • Open the output tray and carefully remove any jammed paper.
  • If the paper is stuck inside the printer, contact HP support.

Network Connectivity Problems:

  • Check if the Ethernet cable is properly connected to the printer and router.
  • Ensure that your router is turned on and connected to the internet.
  • Verify the network settings on the printer’s control panel.
  • Restart the printer and router to reset the network connection.

Fax Problems:

  • Check if the phone line is properly connected to the printer.
  • Ensure that the fax feature is enabled on the printer.
  • Verify the fax number you are trying to dial is correct.
  • Contact your phone carrier to troubleshoot any issues with the phone line.

Additional Tips:

  • Place the printer in a well-ventilated area to prevent overheating.
  • Clean the printer regularly to remove dust and debris.
  • Use high-quality toner cartridges to ensure optimal print quality.
  • Update the printer drivers and firmware regularly to improve performance.

By following these steps and troubleshooting tips, you can successfully set up and configure your HP LaserJet Pro MFP m130fn and enjoy its advanced features.

Download HP LaserJet Pro MFP m130fn Driver

Ensure your device is fully compatible with the latest drivers for the HP LaserJet Pro MFP m130fn. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver