HP PageWide Managed Color MFP P77440dn – Driver Download, Setup and User Guide

Advertisement

HP PageWide Managed Color MFP P77440dn Setup Guide

Unboxing and Assembly

  1. Remove all exterior packaging.
  2. Lift the printer out of the box and place it on a sturdy surface.
  3. Remove the front and rear protective covers.
  4. Unpack the toner cartridges and imaging drum.

Toner and Imaging Drum Installation

  1. Open the front door of the printer.
  2. Grasp the toner cartridge handle and gently rock it back and forth to loosen it.
  3. Pull the toner cartridge straight out of the printer.
  4. Pull the imaging drum unit out of the printer.
  5. Remove the new toner cartridge from its packaging.
  6. Remove the protective cover from the new imaging drum unit.
  7. Insert the new imaging drum unit into the printer.
  8. Slide the new toner cartridge into the printer until it clicks into place.
  9. Close the front door of the printer.

Network Connection

  1. Connect an Ethernet cable to the Ethernet port on the back of the printer and to your network.
  2. Turn on the printer.
  3. Wait for the printer to establish a network connection, indicated by a solid green light next to the Ethernet port.

Software Installation

  1. Insert the software CD into your computer’s DVD drive.
  2. Follow the on-screen instructions to install the HP Print and Scan Doctor software.
  3. Click on “Connect a new printer” and select your printer from the list.
  4. Click on “Install” and follow the prompts to complete the software installation.

Troubleshooting Common Issues

Paper Jams

  1. Open the front and rear covers of the printer.
  2. Remove any jammed paper from the paper path.
  3. Close the covers and restart the printer.

Print Quality Issues

  1. Check the toner cartridges and imaging drum for wear or damage. If necessary, replace them.
  2. Calibrate the printer by accessing the “Calibrate” menu in the printer’s control panel.
  3. Clean the fuser assembly by accessing the “Clean fuser” menu in the printer’s control panel.

Network Connectivity Issues

  1. Check the Ethernet cable connection between the printer and your network.
  2. Ensure that your printer’s IP address is configured correctly. You can find the IP address in the printer’s control panel.
  3. Reboot your router or switch.

Printer Not Responding

  1. Turn off the printer and unplug it from the power outlet.
  2. Wait 30 seconds and then plug it back in and turn it on.
  3. Reset the printer by holding down the “Power” button for 10 seconds.

Download HP PageWide Managed Color MFP P77440dn Driver

Ensure your device is fully compatible with the latest drivers for the HP PageWide Managed Color MFP P77440dn. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver