HP PSC 1317 All-in-one Printer – Driver Download, Setup and User Guide

Advertisement

Setting Up the HP PSC 1317 All-in-One Printer

Introduction:

The HP PSC 1317 is a versatile all-in-one printer that offers printing, scanning, and copying functions. Setting it up is a straightforward process that can be completed in a few simple steps.

Step-by-Step Setup Guide:

1. Unpack the Printer:

  • Carefully remove the printer from the box and place it on a flat, stable surface.
  • Remove all protective materials and tape from the device.

2. Connect the Cables:

  • Connect the power cord to the printer and a power outlet.
  • Connect the USB cable to the printer and an available USB port on your computer.

3. Install the Software:

  • Insert the HP software disc into your computer’s optical drive.
  • Follow the on-screen instructions to install the necessary drivers and software.

4. Load Paper:

  • Open the paper tray at the front of the printer.
  • Insert a stack of plain paper into the tray with the printable side facing up.
  • Adjust the paper guides to snugly fit the edges of the paper.

5. Install Ink Cartridges:

  • Open the cartridge access door on the side of the printer.
  • Remove the protective caps from the new ink cartridges.
  • Insert the color cartridge into the left slot and the black cartridge into the right slot.
  • Push the cartridges firmly into place until they click.

6. Initialize the Printer:

  • The printer will automatically turn on and perform an initialization process.
  • You may see a message on the computer screen asking you to align the print cartridges. Follow the instructions to complete the alignment.

7. Test Printing:

  • Open a document on your computer and select “Print.”
  • Choose the HP PSC 1317 printer as the destination and click “Print.”
  • If the test page prints successfully, your printer is ready to use.

Troubleshooting Common Issues:

1. Printer Not Detected:

  • Ensure that the USB cable is securely connected to both the printer and the computer.
  • Restart the printer and the computer.
  • Try connecting the USB cable to a different port on the computer.

2. Print Quality Issues:

  • Clean the print cartridges by following the instructions in the user manual.
  • Check for paper jams or debris inside the printer.
  • Verify that you are using the correct paper type for your print job.

3. Scanning Issues:

  • Ensure that the scanner glass is clean.
  • Check that the scanning software is open and running.
  • Reseat the USB cable connecting the printer to the computer.

4. Ink Smudging:

  • Replace the smudged ink cartridges with new ones.
  • Clean the print head according to the manufacturer’s instructions.
  • Try using a different type of paper that is compatible with the printer.

5. Jammed Paper:

  • Gently pull the jammed paper out of the printer tray or output tray.
  • Remove any torn or wrinkled paper from the printer.
  • Check for any obstructions inside the paper path and remove them.

Conclusion:

Setting up the HP PSC 1317 All-in-One Printer is a simple process that can be completed in a few easy steps. By following the instructions outlined in this guide, you can ensure that your printer is functioning properly and ready to meet your printing, scanning, and copying needs. If you encounter any issues, refer to the troubleshooting section for guidance on resolving common problems.

Download HP PSC 1317 All-in-one Printer Driver

Ensure your device is fully compatible with the latest drivers for the HP PSC 1317 All-in-one Printer. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver