Xerox WorkCentre PE114e – Driver Download, Setup and User Guide

Advertisement

Setting Up the Xerox WorkCentre PE114e: A Detailed Guide

Unboxing and Assembly

  1. Carefully remove the printer from the box.
  2. Take out the toner cartridge and remove the protective packaging.
  3. Insert the toner cartridge into the printer.
  4. Place the printer on a flat, sturdy surface.

Powering On and Initial Setup

  1. Connect the power cord to the printer and the power outlet.
  2. Turn on the printer by pressing the power button.
  3. Select your language and country from the on-screen menu.
  4. Follow the prompts to set up the Wi-Fi connection.

Installing Drivers and Software

  1. Insert the installation CD into your computer.
  2. Run the installation wizard.
  3. Follow the on-screen instructions to complete the installation.

Troubleshooting Common Issues

Printer Not Printing:

  • Check if the printer is turned on and connected to power.
  • Ensure the paper tray is not empty and the paper is properly aligned.
  • Make sure the toner cartridge is installed correctly.
  • Restart the printer by turning it off and then on again.

Paper Jam:

  • Open the paper tray and gently remove any jammed paper.
  • If the paper is stuck inside the printer, turn it off and unplug it. Then, carefully pull out the jammed paper from the back or bottom of the printer.

Wi-Fi Connection Problems:

  • Check if your computer or mobile device is connected to the same Wi-Fi network as the printer.
  • Restart the printer and router.
  • Make sure the printer is not too far from the router.
  • Reset the printer’s Wi-Fi settings by pressing and holding the Wi-Fi button for 10 seconds.

Toner Cartridge Issues:

  • If you receive a “Low Toner” message, replace the toner cartridge with a new one.
  • Ensure the toner cartridge is compatible with the printer model.
  • If the printer does not recognize the new toner cartridge, try重新启动the printer.

Error Codes:

  • 001: Cover open. Check if the front cover or ADF is open.
  • 002: Paper jam. Refer to the steps above for paper jam troubleshooting.
  • 003: Toner cartridge not installed or not detected. Check if the toner cartridge is properly installed.
  • 004: Waste toner box full. Contact Xerox support for assistance.
  • 005: Fuser overheat. Unplug the printer and wait for it to cool down before restarting.

Additional Tips

  • Use high-quality paper to avoid paper jams.
  • Clean the printer regularly to ensure optimal performance.
  • Update the printer firmware regularly for improved functionality.
  • Refer to the user manual for detailed instructions and additional troubleshooting assistance.

Download Xerox WorkCentre PE114e Driver

Ensure your device is fully compatible with the latest drivers for the Xerox WorkCentre PE114e. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver