Canon PIXMA MP640 – Driver Download, Setup and User Guide

Advertisement

Detailed Guide to Setting Up the Canon PIXMA MP640

Preparing for Setup

Materials Required:

  • Printer
  • Power cord
  • USB cable (for wired connection)
  • Ink cartridges (4)
  • Paper (plain or photo paper)

Physical Setup

  1. Unpack the printer and remove all protective packaging.
  2. Insert the ink cartridges into their designated slots.
  3. Load paper into the paper tray and adjust the paper guides.
  4. Connect the power cord to the back of the printer and an electrical outlet.
  5. Connect the USB cable to the back of the printer and a USB port on your computer (for wired connection).

Software Installation

  1. Insert the Canon software disc into your computer’s optical drive.
  2. Follow the on-screen instructions to install the printer software.
  3. Select the “Standard” or “Recommended” installation type.
  4. When prompted, connect your printer to your computer via USB cable or Wi-Fi (if your model supports wireless printing).

Wireless Printing (Optional)

  1. Ensure your Wi-Fi router is turned on and within range of the printer.
  2. Access the printer’s menu using the buttons on the control panel.
  3. Navigate to the “Wi-Fi Setup” or “Wireless LAN Setup” section.
  4. Select the “WPS Setup” or “Manual Setup” option and follow the instructions on the screen.
  5. The printer will search for and connect to your Wi-Fi network.

Troubleshooting Common Issues

Printer Not Printing:

  • Check if the printer is turned on and connected to your computer or Wi-Fi network.
  • Make sure the ink cartridges are installed correctly and have ink.
  • Verify that there is paper loaded in the tray.
  • Clean the print heads by following the instructions in the printer’s user manual.

Blurred or Faded Prints:

  • Use high-quality paper that meets the recommended specifications for your printer.
  • Check the ink levels and replace any empty or low cartridges.
  • Reset the printer by turning it off, waiting 30 seconds, and then turning it back on.

Print Job Stuck in Queue:

  • Open the “Printers” window in your computer’s control panel.
  • Right-click on the stuck print job and select “Cancel.”
  • Restart the printer and your computer.

Wi-Fi Connection Issues:

  • Ensure your Wi-Fi router is turned on and within range of the printer.
  • Check if the printer and your computer are connected to the same Wi-Fi network.
  • Reset the Wi-Fi settings on the printer and your router.

Other Issues:

  • If you encounter any other issues, refer to the printer’s user manual or contact Canon customer support.

Download Canon PIXMA MP640 Driver

Ensure your device is fully compatible with the latest drivers for the Canon PIXMA MP640. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver